Index Home

Order Info

Contact Us

 

 1 Inch Tablar Slide Buckles ( Mil-spec part #MIL-B-543, MS51944)

Brand new genuine U.S. of A manufactured 1 Inch Tablar slide buckles, these are identical to WWII production and are made by one of the same company’s that produced these during WWII. As used on just about every piece of WWII web gear such as packs, suspenders, and bags and everything we make. Please Note these are the stamped/pressed steel version of the Tablar slide and are thus thinner than the stamp brass early type buckles and the latter cast brass and economy zinc buckles, its just the original spec's for the steel ones mean that don't need to be as thick, this is due to the superior strength properties of the steel over brass for its thickness.Finally these have a light oil protective coating on them from the factory, this requires removing before fitting unless you want marks on your web gear.

£2.00 (Per Pair)

 

 1 Inch Ball End Tips (Mil-spec part # MS51926-3)

Genuine Anchor Brand manufactured 1 Inch Ball end tip, these are identical to WWII production and are made by one of the same company’s that produced these during WWII. These are not the cheap Chinese or South American copies found on many reproductions items made by many reproduction company’s these are the real deal.As used on just about every piece of WWII web gear such as packs, suspenders, bags, U.S.M.C. items etc.

(Please note, these require crushing to fit them to your straps, this is best done using ether a hammer or with a metal working vice which has been fitted with soft jaws. Or if like us, if you have a press even better.)

£1.50 (Per Pair)

 

 Replacement 1 inch"C" Tips (AKA "Horseshoe" End Tips)

Here we have brand new replacement "C" tips also known as "Roko Pattern" and "Horseshoe" end tips, as used for certain WWII 1 inch webbing applications, such as M1 carbine slings, riggers satchel charge bags, and also many Radio gear related items, and some vehicle tie down straps such as MB,GPW, M38A1 etc . These tips are from one of our US suppliers, and are still current spec, and are available from us in the correct government Black oxide finish also they are steel and of a heavy gauge. Please note these are oiled and require wiping before use.

(As to fitting this is best done ether using a hammer and flat steel surface, our preferably a stout engineering vice with plain grips, please remember to protect the tips when fitting or you'll have to re-touch the finish using cold chemical gun black)

 

£1.50 (Per Pair)

 

 1 Inch Raised Bar Slide Buckles (Mil-spec part # MIL-B-543, MS51927)

Genuine Anchor Brand manufactured 1 Inch Raised Bar slide buckles, these are identical to WWI and WWII production and are made by one of the same company’s that produced these during WWII. As used of packs, suspenders, bags, U.S.M.C. 782 gear etc, from WWI until Now! SOLID BRASS.

£2.00 (Per Pair)

 

 5/8  Ball End Tip (Mil-spec part # MS51926-1)

Genuine American manufactured 5/8 th Ball end tip, these are identical to WWII production and are made by one of the same company’s that produced these during WWII. These are not the cheap Chinese or South American copies found on many reproductions items made by all Far Eastern company’s these are the real deal. As used on just about every piece of WWII web gear such as pack’s, bag’s, Knapsack’s and most U.S.M.C. items , also this size tip was used on all 5/8 and 3/4 strap applications.

(Please note, these require crushing to fit them to your straps, this is best done using ether a hammer or for best results we recommend using a metal working vice which has been fitted with soft jaws. Or if like us, if you have a press even better.)

£1.50 (Per Pair)

 

 5/8 of an inch Tablar Slide Buckles (Mil-spec part #MIL-B-543, MS51944)

Brand new genuine U.S.of A manufactured 5/8 of an Inch Tablar slide buckles, these are identical to WWII production and are made by one of the same company’s that produced these during WWII. As used on many pieces of WWII web gear such as USMC Packs, Doughboy pack, Covers for Tools such as M1910 shovels, axes, pick matooks. Please Note these are the stamped/pressed steel version of the Tablar slide and are thus thinner than the stamp brass early type buckles and the latter cast brass and economy zinc buckles, its just the original spec's for the steel ones mean that don't need to be as thick, this is due to the superior strength properties of the steel over brass for its thickness. Finally these have a light oil protective coating on them from the factory to help prevent rust, and protect the stain Blue/Black Oxide finish*. This size buckle was used on 5/8 and 3/4 strap applications.

Yes folks there £1.25 EACH, thats because there specially made for us as this type of buckle is not longer commercially produced within the U.S.A. custom hardware costs money.

(*Please note these require wiping before use.)

£1.75 (Each)

 

 1 Inch Snap Hook (Mil-spec part # MIL-S-43770/1A, MS51828)

Genuine Anchor Brand manufactured 1 Inch Snap hooks, these are identical to WWII production and are made by one of the same company's that produced these during WWII. As used on just about every piece of WWII web gear such as packs, suspenders, bags, U.S.M.C. items etc. PLEASE NOTE, Anchor Brand is a U.S. global company which now owns and operates manufacturing facilities outside mainland America, as a result these snap hooks are made at the ANCHOR BRAND factory in the Far East (Taiwan) this is due to the reduced labour costs there, these Snap hooks are not Cheap Chinese junk copies they are exactly the same as the WWII originals, however are now made under American control, but not on American soil.

£2.50 (Per Pair)

 

 WWII U.S Field Gear Repair Kit #1

All items are genuine U.S. of A manufactured, these are identical to WWII production and are made by the same company’s that produced these during WWII. These are not the cheap Chinese or South American copies found on many reproductions items made by many reproduction company’s these are the real deal. As used on many late WWI and early WWII web gear items such as packs, suspenders, bags, and US Army web kit etc.

1 Inch Tablar slide buckle Mil-spec part # MIL-B-543 MS51944

1 Inch Ball end tip Mil-spec part # MS51926-3

1 Inch Snap hook Mil-spec part # MIL-S-43770/1A MS51828

(Please note the Snap Hooks are made outside of the U.S.A. at one of Anchor Brand own factories in the Far East)


 

£5.00 (Per Kit)

 

 WWII U.S Field Gear Repair Kit #2

All items are genuine U.S. of A manufactured, these are identical to WWII production and are made by the same company’s that produced these during WWII. These are not the cheap Chinese or South American copies found on many reproductions items made by many reproduction company’s these are the real deal. As used on many late WWI and early WWII web gear items such as packs, suspenders, bags, and USMC web kit Etc.

1 Inch Raised Bar slide buckle Mil-spec part # MIL-B-543 MS51927

1 Inch Ball end tip Mil-spec part # MS51926-3

1 Inch Snap hook Mil-spec part # MIL-S-43770/1A MS51828

£5.00 (Per Kit)

 

 WWII M1910 Double Hook (Mil-spec part # MIL-H-639)

These are brand new production M1910 Hooks as used on all WWII Web gear, from 1909/10 until today, these hooks were used on most U.S. army items of the WWI and WWII period, that were suspended from the issued pistol or rifle as part of the standard equipment, we can now offer you a replacement hook made to WWII spec of MIL-H-639, which can be used to repair any original item. These are made for us from 1/8th steel rod, which has been formed to shape and then Parkerized and finally oil treated*.(*Please note this which means that they will require wiping clean dry before use.)

 

£3.50 (Each)

 

 U.S.M.C. WWII Pattern Double Hook

These are brand new production M1910 Hooks as used on WWII U.S.M.C. Web gear, and were made by United Carr, for use on U.S.M.C. items, these hooks have a very different and distinctive look, to those of the type normally used on other U.S. army items. These are made for us from 1/8th steel rod, which has been formed to shape and then Parkerized and finally oil treated*.

(*Please note this which means that they will require wiping clean dry before use.)

£3.50 (Each)

 

 Replacement Lift The DOT (Genuine Scovil manufacture)

Brand new genuine Scovil manufactured Lift DOT fasteners, these are identical to WWII production and are made by the same company. These are not the cheap Chinese or South American copies found on many reproductions items. We buy these direct for the good old U.S. of A. and exactly the same as we use on all our reproduction U.S. items.

Please note this is £2.25 per complete unit (see below) also tooling is required to fit both the socket and pronged stud, if making a repair then the socket can be fitted through the exciting holes in the items and then fixed in place by folding over the tabs using a hammer, however you will need a 5/16 th punch or similar item to close and rivet the stud and washer together and no we don’t supply the tools.

1 x Socket

1 x Back Plate Fixing Washer

1 x Stud

1x Stud Fixing Washer

£2.75 (Per Unit)

 

 Replacement DURABLE DOT Fasteners (Genuine Scovil manufacture) 

Brand new DURABLE DOT fasteners, these are identical to WWII production. The ones shown below above are Selenium Dioxide Black over Copper on Steel, Non-Branded range, also available are Scovil manufactured DURABLE DOT fasteners in Brass Black Ebonal Finish, these are identical to WWII production and are made by the same company. These are not the cheap Chinese or South American copies found on many reproductions items, and they are not European manufactured versions in metric sizes, these are the correct imperial dimensions and so will fit correctly with any original fasteners. As used on a large number of U.S.M.C. items, and are also still current issue for M.O.L.L.E equipment.

Four complete units Base washer, male stud, cap, female.

£2.50 (Per Four Complete Units Black Selenium Dioxide On Steel)

£3.00 (Per Four Complete Units Black Ebonal On Brass)

 

 WWII Replacement Tubular Rivets (Webbing Gear Reinforcement Rivets)

New production Tubular Rivets as used on U.S. Government webbing equipment during WWII for the Re-enforcement of high stress points on certain items, for example M 1936 Suspenders, and M1943 Folding E-Tool cover. These are all new production, and are finished in a Black oxide. Five units per Sale I.E (Cap & Stud)

£2.00 (Per Set Of Five)

 N.O.S. WWII Replacement 1937 Pattern 3/4 Of An Inch (Open Bar Flat Slide Brass)

Brand new production 3/4 inch solid brass slide, these are flat slides for use on certain P37 items and we now use these on our Commando skeleton assault vests, these were especially made for us and all we have done is finish and polish them, these have a semi-matt surface due to this process however you can polish them up they are solid 100% Leaded Brass which was obtain from a U.K. supplier and no we did not have these made in China or India. Again these are custom made and solid nether of which are cheap factors these days, so £1.25 each regardless of the number purchased.

£1.50 (Each)

 

 N.O.S. WWII Replacement 1937 Pattern 1 Inch (Open Bar Slides Brass)

These are new old stock production 1 Inch brass Open Bar Slides as used on all 1908 and 1937 pattern British webbing equipment during both world wars. These were made in the U. K. by one of the original WWII company's. We do have other 37 pattern items in stock, if you need something specific then please ask.

£3.50 (Per Pair)

 

 WWII Replacement 1937 Pattern 1 Inch (End Tips Brass)

These are new old stock production 1 Inch brass End tips as used on all 1908 and 1937 pattern British webbing equipment during both world wars. These were made in the U. K. by one of the original WWII company's. Unfortunately due to being new production I've had to put the cost per unit up, this is down current brass prices on the global market. The set does include the required 5/32 rivets which are need to fix the tips to the end of the web strap. We do have other 37 pattern items in stock, if you need something specific then please ask.

£3.50 (Per Pair)

 

 

 WWII Replacement 1937 Pattern 2 Inch (End Tips Brass)

These are new old stock production 2 Inch brass End tips as used on all 1908 and 1937 pattern British webbing equipment during both world wars. These were made in the U. K. by one of the original WWII company's. Unfortunately due to being new production I've had to put the cost per unit up, this is down current brass prices on the global market. The set does include the required 5/32 rivets which are need to fix the tips to the end of the web strap. We do have other 37 pattern items in stock, if you need something specific then please ask.

£4.50 (Per Pair)

 

 

 WWII 1937 Pattern Webbing Repair Kit #1

Webbing repair kit suitable for 1908 and 1937 pattern British webbing equipment during both world wars. These were made in the U. K. by one of the original WWII company's.

2 x 1 Inch End Tips with Rivets

2 x 1 Inch Open Mouth Slides Buckles.
 

£5.50 (Per Kit)

 

 

 WWII Mk 2 Denim Buttons (N.O.S. Olive)

These are genuine brand new, straight out of the original wartime box, Olive plastic buttons as used on WW2 (1940 onwards) and early post war Denim battledress uniform, these were manufactured by DORMER During WWII and have been in storage ever since, they were and were inspected and repacked in 1957 and then put back into store. We are offering theses buttons in sets of ten which works out at £0.25 pence each, these do not have the clips as they were packed as a separate item, however small brass curtain rings are ideal and were in fact used on some sets, my original denims being one such set.

CAT No C.A. 3674 (MSB 4843)

Contract No 6/CL0/40375/CB46C

Manufactuer Dormer

Colour- Khaki Drab

£3.00 (Sold in Units of 10)

 

 Type III Class III Strap webbing  (O.D.3 Light Olive)

100% Cotton pre dyed yarn webbing in (O.D3 Mid Olive shade) this is especially manufactured for us on original Dobby shuttle loom dating from the 1890's and is exactly the same as the WWII Type III Class III weave used for 99% OD ALL U.S. web gear of the WWII period, this is available by the metre or by the roll (P.O.A).

1 Inch Type III Class III £4.75 (Per Metre)

2 Inch  Type III Class III £5.00 (Per Metre)

 Type III Class III Strap Webbing ( Khaki/Tan)

100% Cotton pre dyed yarn webbing in (Khaki/Tan shade) this is especially manufactured for us on original Dobby shuttle loom dating from the 1890's and is exactly the same as the WWII Type III Class III weave used for 99% OD ALL U.S. web gear of the WWII period, this is available by the metre or by the roll (P.O.A).

  5/8 of an Inch Type III Class III £4.50 (Per Metre)

1 Inch Type III Class III £4.75 (Per Metre)

2 Inch Type III Class III £5.00 (Per Metre)

 Type III Class III Strap Webbing (Khaki/Sand)

100% Cotton pre dyed yarn webbing in (Khaki/Sand shade) this is especially manufactured for us on original Dobby shuttle loom dating from the 1890's and is exactly the same as the WWII Type III Class III weave used for 99% OD ALL U.S. web gear of the WWII period, this is available by the metre or by the roll (P.O.A).

5/8 of an inch Type III Class III £450 (Per Metre)

2 inch Type III Class III £4.75 (Per Metre)

 M1956 Slide Keepers  (Used) 

I have a limited stock of second hand U.S. Government slide keepers please note there not brand new and where removed from surplus U.S. ALICE Equipment.

£3.00 (Per Pair)